The final part of the installation of windows is the decoration of the opening. The importance of this process cannot be underestimated. Since the final result of all the work depends on how the installation of slopes and window sills on plastic windows will be performed.
Mandatory activities after window installation
Clearances
When the window is already installed in its place, the gap between the opening and the profile is necessarily foamed with mounting foam. It is important in the future to install the window sills very carefully so as not to damage the filled space, if this happens, all work may be in jeopardy. The formation of gaps is unacceptable, since the formation of drafts is possible.
Stitching
After deciding to install plastic slopes, decorate them with tiles or putty, it is very important to set the correct angle. The sufficient penetration of daylight into the room depends on the so-called bridging. This seemingly little thing is often not given due importance, but it is from it that the natural lighting in the house depends. Do-it-yourself pvc dobors must be installed very carefully.
Level
Another nuance concerns the construction standards for plastic windows in relation to level control. He needs to be at the “zero” mark. Deviation from the standards subsequently will invariably lead to accumulation of condensate. Many people mistakenly perceive the installation of a window sill as not a very important finish, which can be done approximately evenly, “by eye”. This should not be allowed.
Note! In order to avoid negative consequences, it is better to entrust the installation of window sills and slopes to professional craftsmen who will perform the whole complex of works with a maximum reliability coefficient.
Types of jobs
Plastic finish
The most popular technology is when the installation of slopes and window sills on plastic windows is carried out from the same PVC material. There are plenty of advantages in this decor: lightness, practicality, low cost and ease of care. The advantages of plastic made it the most popular building consumables for repairs in old housing stock and new buildings.
Plaster
The second method of window sill decoration is done by plastering, further puttying and painting. It is worth noting that although this method has the right to be introduced, it is actually rarely used, due to significant labor costs. However, this technology is often used in the installation of slopes. Sometimes the final decor completes pasting with special moisture-proof wallpaper. At the same time, the slopes and window sills with this finish have increased reliability, it is theoretically impossible to damage them.
Tile or mosaic
The third common option is tiled or mosaic tiling. Window sills and the appearance of slopes with this finish look very original and unusual. Often this type of decor is used in a private house or cottage.
Wood
Another popular way of decorating is when the windows are trimmed with wood. Cabinet makers carry out very worthy models on order. The manufacture of window sills does not take much time, and the parts are installed using a technology similar to the simplest assembly of parts according to the “designer” principle. First, the window profile is set, then the window sills are installed and after that the turn of the right, left and top “extension” is on.
Drywall
The duo of drywall slopes and plastic window sills is very common. This combination allows you to save on the purchase of plastic, but at the same time requires a lot of labor, since you have to mount the material of different types and properties.
Sill with increased functional load
When performing design repairs in a small area of kitchens, it is advisable to install a window sill, which will significantly increase the working surface. This technology is conventionally called “language”, when the windowsill is significantly extended into the room, and serves as a table.
Note! For significant savings, you can make the finish of slopes and window sills with PVC materials yourself. In this case, you need to take into account that you will need to use a set of power tools, and you must also have at least minimal practical knowledge of all repair processes.
Phased progress
The sequence and procedure is crucial. First you need to prepare the joints of the windowsill and slopes to the window. During this stage, excess foam is cut off with the possibility of inserting “add-ons” according to the “flush” principle. It will be useful to coat the base with a primer.
Next is the installation of the windowsill according to the level with the calculation of the removal of 3-5 cm. Out. This is done to increase the working surface and mark the boundaries of the opening. In cases of the formation of a large gap between the base and the inner side of the window sill, it must also be foamed and putty or covered with panels at the final stage.
The third stage. As already noted, when installing the slopes with your own hands on the windows, you need to consider that it is impossible without the correct calculation of the angle. Its value is influenced by the values: the width of the opening and the area of the room. The optimal ratio for a room size of 15 square meters. m, slope width of 25 cm - make a dawn equal to 2.5 cm. The sides and upper sides should have the same extension.
The final decoration consists of a corner sticker that closes the gap between the wall and the slope. Sometimes it is performed in the form of platbands.
Tool Required:
- electric jigsaw or small grinder;
- glue gun or liquid nails;
- construction knife;
- level;
- gun for mounting foam with 1-2 cylinders;
- sponge roller and brush;
- pencil;
- building corner;
- roulette;
- spatula 5-10 cm wide .;
- in some cases, you will need to use a stapler, since the brackets securely fasten the structure;
- a screwdriver or an electric drill.
Note! The presented tool kit is relevant when installing plastic materials. When finishing in another way, this list needs to be expanded.
Summarizing the review, it is worth noting that each presented method of decoration is good in its own way. It all depends on the tasks that will be assigned to the design in the future. Only observing all installation rules, you can not worry about problems with heat losses and drafts in the future. An exhaustive answer was given to the main question - how to install a window sill and slopes, and, as they say, "cards in your hands".